EV chargers · UK · Guide
Home EV charger guide: how to choose
Charging on the drive overnight is where an electric car gets cheap. This guide shows how to pick the home EV charger, the installer and the tariff that make it so.
Key facts
- Every home charger sold since 30 June 2022 must be smart, and the regulations define weekday peak hours as 8am to 11am and 4pm to 10pm.1
- On a single-phase supply a home charger tops out at 7.4 kW; 22 kW needs three-phase.2
- With a standard installation, prices start at £949 for a smart charger fitted by Octopus, and £999 for the Ohme Home Pro or British Gas’s Hive charger.3,4,5
- Headline EV tariffs charge 6.5p to 9.5p per kWh overnight, against a capped standard rate of 26.32p for October to December 2026.3,6,7,8
- Renters and flat owners can get 75% of the cost, up to £500, until 31 March 2027.9
On this page
- What every home EV charger has to do by law
- Tethered or untethered?
- Charger power: what does your supply allow?
- How long does a home charge take?
- Does the charger need to share power with the house?
- How much does a home EV charger cost?
- Wi-Fi, 4G or Ethernet: does the connection matter?
- How long are the warranties?
- What happens when it’s fitted
- Do solar panels change the choice?
- Which EV tariff should you pair it with?
- Is there a grant for a home charger?
- Our verdict by driver type
Buy a smart charger with a tethered cable, have it fitted by an installer who handles the network paperwork, and pair it with an overnight EV tariff. The headline EV tariffs from Octopus, E.ON Next, EDF and British Gas charge 6.5p to 9.5p per kWh overnight, while the capped standard rate for October to December 2026 is 26.32p.3,10,6,7,8 The tariff decides most of your running cost; the charger mainly decides how easy it is to use. Get the pairing wrong and an expensive box on the wall charges at peak rates and the saving never arrives.
Which charger? If you have solar panels, the myenergi zappi. If you want the cheapest sensible installed price, any charger on Octopus’s list or the Ohme Home Pro. If the box will sit on the front of a period house and looks matter, the Andersen A3.11,4,12
What every home EV charger has to do by law
Any home charger sold since 30 June 2022 has to be smart.1 That gives you a baseline every model on sale meets:
- It talks to the network. It must send and receive data over a communications link and be able to change the rate or timing of a charge in response.1
- It keeps working if you switch supplier. A charger may not lose its smart functions because you move to a different energy company.1
- It still charges offline. If the internet drops, the car must still charge.1
- It comes set to avoid the peaks. Default charging hours must sit outside 8am to 11am and 4pm to 10pm on weekdays. You can accept those hours, change them or remove them, and override them whenever you need a charge.1
- It waits a moment before starting. A randomised delay of up to 600 seconds is switched on by default before a scheduled charge starts; you can cancel it.1
- It records what it does. You must be able to see energy and charging time for each session over the last 12 months.1
The rules cover chargers for cars and vans, except public and rapid chargers of 50 kW and above.1 Every new charger is sold with a signed statement of compliance; keep it with the installation paperwork.1
Tethered or untethered?
A tethered charger has the cable fixed to the unit. An untethered one has a socket, and you use the cable that came with your car.
Tethered is the better daily choice for most drivers: you lift the plug, push it into the car and walk away, with no cable to fish out of the boot on a wet evening. Lengths vary more than people expect. Hypervolt’s Home 3 Pro, for example, comes with a 5, 7.5 or 10 m tethered cable, and the zappi, Ohme Home Pro and Andersen A3 each have their own fixed length.2,4,12,13 Measure from the wall to the far side of where you park before you choose.
Untethered suits a tidy front wall, a household with two cars that use different connectors, or anyone who already carries a long cable. Octopus sells its own charger both ways: the untethered version takes a Type 1 or Type 2 cable, the tethered one has Type 2.14
Charger power: what does your supply allow?
On a single-phase supply a home charger delivers at most 7.4 kW. A three-phase supply allows up to 22 kW, if the car can take it.2
For almost everyone, 7.4 kW is enough. Run through the six-hour Intelligent Octopus Go window, a 7.4 kW charger can put a lot of range into the car.14,3 All five chargers Octopus fits are 7.4 kW units.14 Pay for a 22 kW-capable charger only if you already have three-phase power: the zappi and the Andersen A2 and Quartz offer it.2,12
How long does a home charge take?
Divide the energy you need by the charger’s power. At 7.4 kW, a big top-up takes most of a night; a smaller top-up after a normal day takes a few hours.4 That is why the overnight window matters more than raw speed: the car does the waiting, not you, and it waits while electricity is cheap.
The car has a say too. A 22 kW charger only charges faster if the car’s onboard charger accepts that much, which is why the zappi’s three-phase rating comes with the words “vehicle permitting”.2
Does the charger need to share power with the house?
Your home has one incoming supply, and the charger draws up to 32 amps of it at full power.4 Network operators check the total: on SSEN’s network the threshold for a simple notification is 60 amps of total demand.15 Chargers with load management watch the rest of the house and turn the charge down when the house is drawing a lot. The Hypervolt Home 3 Pro has automatic load management, the Rolec WallPod comes with dynamic load balancing and the CT clamp it needs, and the Ohme Home Pro lists home power balancing.13,16,4 Ask your installer at the survey whether your home needs it.
How much does a home EV charger cost?
These are starting prices, as each maker or seller lists them.
| Charger | Starting price | Installation |
|---|---|---|
| Smart charger fitted by Octopus | £949 | included (standard)3 |
| Ohme Home Pro | £999 | included (standard)4 |
| Hive Sync Energy Wall Charger 2 (British Gas) | £999 | included (standard)5 |
| Andersen Quartz | £695; installed from £1,130 | optional12 |
| Andersen A3 | £995; installed from £1,430 | optional12 |
| myenergi zappi | £779 inc. VAT | –2 |
A dash means no installed price is published.
“Standard installation” is the catch. Hive’s, for example, assumes up to 10 m of cable on an outside route with no bonding work; bonding adds £144, and a longer or internal cable run £50 to £180.5 Get a fixed quote after a survey, not a figure from a web form.
Wi-Fi, 4G or Ethernet: does the connection matter?
More than most buyers expect. A smart tariff schedules your charging over the internet, so a charger that keeps dropping off the network quietly loses you the cheap slots. The law makes sure the car still charges offline, but not that it charges at the right time.1
The models split three ways:
- Wi-Fi and Ethernet: the zappi, so you can run a cable if the router is close.2
- Built-in mobile data: the Ohme Home Pro has a 4G SIM, but Ohme’s mobile connection needs a strong signal.4,14
- Belt and braces: Octopus’s own charger uses 4G, Wi-Fi and Bluetooth, and the Rolec WallPod offers 4G, Wi-Fi or Ethernet.14,16
The Hypervolt Home 3 Pro connects over 2.4 GHz Wi-Fi and Bluetooth LE.13 If your router is at the other end of the house from the drive, test the signal at the wall with your phone before you choose.
How long are the warranties?
Three years is standard: the zappi, the Ohme Home Pro and British Gas’s Hive charger all come with it.11,4,17 Through Octopus, you can extend its own charger to five years for £79 and the Hypervolt to five years for £100.14 Andersen is the outlier, with 7 years across its range.12 On a box you expect to use every night for a decade, that difference is worth more than a fancy screen.
What happens when it’s fitted
Your installer checks two things before anything goes on the wall: that your supply can carry the charger on top of everything else in the house, and that the earthing arrangement suits an EV charger.15 Some chargers build in protection against faults on the incoming supply’s earth, so neither the zappi nor the Rolec WallPod needs an earth rod.2,16
Then comes the network operator. Take SSEN’s area as an example. If your home’s total demand stays at 60 amps or less, the installer fits the charger and notifies SSEN within 28 days. Above 60 amps, or on a looped supply shared with a neighbour, they must apply first and wait for approval.15 If the supply needs an upgrade or unlooping, SSEN arranges it before the charger goes in.15 A good installer handles all of this; Octopus files the network application as part of its installation.14 Our step-by-step guide to installing an EV charger at home walks through the full sequence.
Building a new home or carrying out a major renovation in England? Approved Document S sets the charge point requirements for those projects.18
Do solar panels change the choice?
Yes, and it is the clearest case for the zappi. Its ECO mode charges from spare solar power and tops up from the grid when the surplus drops below 1.4 kW; ECO+ pauses when the house would import too much and carries on once there is spare solar again.11 The Hypervolt Home 3 Pro has a similar pair, Eco (solar and grid) and Super Eco (solar only), and Hypervolt is the one charger on Octopus’s list rated for solar and a home battery.13,14
If you are still deciding whether to add storage, read our guide to solar batteries first. Renting, or no roof to speak of? Plug-in solar is now legal and plugs into an ordinary socket.
Which EV tariff should you pair it with?
A charger without an EV tariff wastes most of the point of having one. Overnight rates on the main EV tariffs:
| Tariff | Off-peak rate | Off-peak hours |
|---|---|---|
| Intelligent Octopus Go (Octopus) | 6.5p per kWh | 23:30 to 05:30, plus extra smart-charging slots3 |
| E.ON Next Drive Smart | 6.5p per kWh, fixed 12 months | midnight to 6am10 |
| EDF GoElectric | 6.66p per kWh | 11pm to 6am6 |
| British Gas EV Power | 9.5p per kWh | midnight to 5am7 |
The gap is large. A charge at 6.5p costs a fraction of the same charge at the capped 26.32p.3,8 Smart tariffs such as Intelligent Octopus Go work only with supported cars or chargers, while EDF’s GoElectric works with any car and any charger.3,6 All of them need a smart meter; see our guide to smart meters.
For the full comparison, see the best EV tariffs, or work out your own figures with the EV charging cost calculator. Its electricity price starts at the capped 26.32p, which is what charging costs on a standard tariff; on an EV tariff, type in your off-peak rate instead, or the result will overstate what overnight charging costs you.8
Is there a grant for a home charger?
Only for renters and flat owners. The government pays 75% of the cost of buying and fitting a charger, up to £500, and the scheme runs until 31 March 2027 unless it is renewed.9 You qualify if you rent your home, of any kind, or own and live in a flat, and have a private off-street parking space. The car must be on the approved list and yours, on order, or leased for at least 6 months. Owners of a house don’t qualify, unless it has been converted into flats and they live in one of them.19
Our verdict by driver type
- You have solar panels: the myenergi zappi. Its ECO and ECO+ modes are built around spare solar power, and it connects by Wi-Fi or Ethernet.11,2
- You want the lowest running cost and don’t mind Octopus: any charger Octopus fits, on Intelligent Octopus Go. Read our Octopus charger guide and the Intelligent Octopus Go explainer.
- Weak Wi-Fi where you park: the Ohme Home Pro has a 4G SIM, and Octopus’s own charger uses 4G, Wi-Fi and Bluetooth.4,14
- Looks matter, or you want a long warranty: the Andersen A3 hides its cable and comes with a multi-year warranty.12
- You want the charger and tariff from one company: British Gas fits the Hive charger from a published starting price with a standard installation, and its Power+ mode returns a stated share of charging costs on a British Gas electricity tariff.5,17
Who shouldn’t bother with a 22 kW unit? Anyone on single-phase power.2 And nobody needs to pay extra for “smart”: the law already requires it.1
For side-by-side specs of six models, see our comparison of the best home EV chargers.
Products compared
Show all 7 ▸
Hypervolt
Hypervolt Home 3 Pro
Price: No published price
Hypervolt Home 3 Pro: Where to buy: support.hypervolt.co.uk
as of · support.hypervolt.co.uk
Rolec
Rolec WallPod
MID meterPrice: No published price
Rolec WallPod: Where to buy: rolecserv.com
as of · rolecserv.com
British Gas
Hive Sync Energy Wall Charger 2
- Charging power
- 7.4 kW7
£9998
Hive Sync Energy Wall Charger 2: Where to buy: hivehome.com
as of · britishgas.co.uk, hivehome.com
Ohme
Ohme ePod
- Charging power
- 7.4 kW / 32 A9
Ohme ePod: Where to buy: ohme-ev.com
as of · ohme-ev.com
| Product | Charging power | Control | Size | Meter | Price |
|---|---|---|---|---|---|
myenergi zappi |
up to 22 kW (three-phase)1 | OCPP 1.6J (via cloud)1 | 438 × 282 × 122 mm1 | – | £779from £779 inc. VAT (installation not included)2myenergi zappi: myenergi.com |
Ohme Home Pro |
7.4 kW / 32 A3 | – | 170 × 200 × 100 mm, 4 kg3 | – | £999from £999 including standard installation3Ohme Home Pro: ohme-ev.com |
Hypervolt Home 3 Pro |
7.4 kW AC, single phase4 | – | 328 × 243 × 101 mm4 | – | No published priceHypervolt Home 3 Pro: support.hypervolt.co.uk |
Andersen A3 |
7 kW (no three-phase option)5 | – | 430 × 310 × 148 mm (156 mm with wooden front)5 | – | £995from £9955Andersen A3: andersen-ev.com |
Rolec WallPodMID meter |
up to 7.4 kW6 | – | – | MID-approved metering6 | No published priceRolec WallPod: rolecserv.com |
British GasHive Sync Energy Wall Charger 2 |
7.4 kW7 | – | – | – | £999from £999 with a standard installation (up to 10 m of cable, external route, no bonding work); bonding +£144, longer or internal cable runs +£50–£180, tethered 7 m cable +£508Hive Sync Energy Wall Charger 2: hivehome.com |
Ohme ePod |
7.4 kW / 32 A9 | – | – | – | £949from £949, including standard installation9Ohme ePod: ohme-ev.com |
All data
| Product | Charging power | Cable | Connectivity | Control | Size | Protection | Warranty | Screen | Earthing | Modes | Load management | Colours | Meter |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| myenergi zappi | up to 22 kW (three-phase)1 | Type 2 tethered (6.5 m) or socket1 | Wi-Fi, Ethernet1 | OCPP 1.6J (via cloud)1 | 438 × 282 × 122 mm1 | IP65, IK101 | 3 years2 | – | – | – | – | – | – |
| Ohme Home Pro | 7.4 kW / 32 A3 | Type 2 tethered, 5 m (8 m optional)3 | 4G multi-net SIM3 | – | 170 × 200 × 100 mm, 4 kg3 | IP553 | 3 years3 | Colour LCD screen3 | – | – | – | – | – |
| Hypervolt Home 3 Pro | 7.4 kW AC, single phase4 | Tethered Type 2 or Type 1; 5, 7.5 or 10 m (10 m Type 2 only)4 | Wi-Fi 2.4 GHz, Bluetooth LE4 | – | 328 × 243 × 101 mm4 | IP66, IK104 | – | – | Integrated PEN fault protection (BS 7671:2018 Amendment 2)4 | Boost, Eco (solar and grid), Super Eco (solar only)4 | Automatic load management4 | – | – |
| Andersen A3 | 7 kW (no three-phase option)5 | Tethered 5.5 m, hidden cable5 | – | – | 430 × 310 × 148 mm (156 mm with wooden front)5 | – | 7 years5 | – | – | – | – | 13 colours5 | – |
| Rolec WallPod | up to 7.4 kW6 | Universal socket or Type 2 tethered lead6 | 4G, Wi-Fi or Ethernet; OCPP 1.66 | – | – | IK106 | – | – | PME fault detection, no earth rod required6 | – | – | – | MID-approved metering6 |
| Hive Sync Energy Wall Charger 2 | 7.4 kW7 | Tethered or untethered7 | – | – | – | – | 3 years with installation7 | – | – | – | – | – | – |
| Ohme ePod | 7.4 kW / 32 A9 | Untethered9 | 4G multi-network SIM9 | – | – | – | 3 years9 | – | – | – | – | – | – |
- myenergi.com
- myenergi.com
- ohme-ev.com
- support.hypervolt.co.uk
- andersen-ev.com
- rolecserv.com
- britishgas.co.uk
- hivehome.com
- ohme-ev.com
Specifications come from each maker's own product page or datasheet, taken on 14 NOV 2026. Our picks are editorial judgement from those published specs, not test results; we haven't tested the products. – means the maker publishes no price.
Calculators
EV charging cost calculator
What home charging costs a year, against public charging and an EV tariff, and when a charger pays back.
Pre-filled from: Ofgem
Open the calculator
Example figures · Charging cost a year · as of 14 November 2026 8,000 miles £547–£668 a year
Rules and grants in force
EV chargepoint grant for renters and flat owners
GOV.UK Find a grant
up to £500 as of
Renters and flat owners can get 75% of the cost of a home chargepoint, up to £500 per socket. The scheme closes on the date given in the source unless it is renewed.
Official source find-government-grants.service.gov.uk
Updated · against find-government-grants.service.gov.uk
Energy price cap, 1 October to 31 December 2026
Ofgem
26.32 p/kWh as of
Ofgem's price cap for October to December 2026 puts a typical dual-fuel bill paid by direct debit at £1,723 a year, 4% higher than the previous quarter. Electricity is capped at 26.32p per kWh with a standing charge of 54.83p a day; gas at 7.97p per kWh with a standing charge of 29.68p a day. Ofgem will announce the cap for January to March 2027 by 25 November 2026.
Official source ofgem.gov.uk · ofgem.gov.uk · ofgem.gov.uk
Updated · against ofgem.gov.uk
Dated rule changes
-
in 133 days
Chargepoint grant for renters and flat owners closes
The grant of 75% up to £500 per socket closes at 23:59 on 31 March 2027 unless it is renewed.