EV chargers · UK · Guide
Installing an EV charger at home: every step, in order
A home charger goes on the wall in an afternoon. The wait is everything before it: the survey, the paperwork and the network operator. Know the order, and what to ask at each step, and you stay in charge of the timetable.
Key facts
- Where total demand stays at 60 amps or less, the installer fits the charger and notifies the network operator within 28 days on SSEN’s network.1
- Above 60 amps, or on a looped supply, the installer must apply first and wait for approval.1
- A new charger comes set to avoid 8am to 11am and 4pm to 10pm on weekdays; you can change those hours.2
- Renters and flat owners with off-street parking can get 75% of the cost, up to £500, until 31 March 2027.3
On this page
The car arrives on a Friday. The charger, you assumed, would be on the wall by then. Instead the installer has looked at the old fuse by the front door, gone quiet, and mentioned the network operator. That pause is the part of installing an EV charger that nobody puts in the advert.
The fitting itself is quick: a British Gas installation usually takes three to five hours.4 What takes time is everything before it, above all whether the local network operator has to approve the job first. On SSEN’s network, a home whose total demand stays at 60 amps or less can have the charger fitted and notified afterwards, within 28 days. Above 60 amps, or where the supply is shared with a neighbour, the installer must apply and wait for approval before fitting anything.1
Our advice: choose an installer who handles the network paperwork as part of the price, book the survey the week you order the car, and photograph your fuse and meter for the quote. Then work through the steps below in order.
Step 1: check what you are working with
Three things decide how simple the job is.
- Parking. Your own drive or off-street space is the simple case. If you park on the street, a permanent cross-pavement solution such as a cable channel can carry the cable. Fit one, with your highways authority’s permission, and the government pays 75% of the cost of buying and installing the charger, up to £500, until 11pm on 31 March 2027.5
- The supply. Look at the main fuse, the meter and the consumer unit. Clear photos of them speed up the network operator’s review.1
- Ownership. If you rent or own a leasehold flat, read your tenancy agreement or lease before anything is fixed to a wall. For the government grant, the parking space must be yours, or one you have the legal right to use, and accessible at all times.6
Step 2: choose the charger
Every charger sold for home use has to meet the Smart Charge Points Regulations, so the basics are the same across brands.2 The real choices are tethered or untethered, cable length and whether you want a solar mode. Our home EV charger guide covers those, and the best home EV chargers compares six models.
If you plan to switch to a smart tariff such as Intelligent Octopus Go, check that the charger is supported before you buy.7
Decide where the car’s charging port sits when you park, then measure from the likely charger position to that point, round the bonnet if need be. Fixed cables come in set lengths: 6.5 m on the zappi, 5 m on the Ohme Home Pro with an 8 m upgrade, and 5, 7.5 or 10 m on the Hypervolt Home 3 Pro.8,9,10 A cable that only just reaches on day one is a nuisance for as long as you own the charger, and a nuisance again with your next car.
Step 3: get a survey and a fixed quote
Installed prices start at £949 for a smart charger fitted by Octopus and £999 for the Ohme Home Pro or British Gas’s Hive charger, each with a standard installation.7,9,11 Treat “standard” as the floor. Hive’s standard job assumes up to 10 m of cable on an outside route and no bonding work; bonding adds £144, and a longer or internal cable run £50 to £180.11 British Gas’s final price depends on your home and what the installation needs.4
A proper survey checks two things: that your supply can carry the charger on top of everything else the house uses, and that the earthing arrangement suits an EV charger.1 Ask the surveyor directly:
- Does my home need a network application before installation, or only a notification afterwards?
- Is my supply looped with a neighbour’s?
- Where will the charger go, and how long is the cable run from the consumer unit?
- Does the charger need an earth rod, or does it have built-in protection?
The last question matters because several chargers have protection built in. The zappi has PEN fault technology and needs no earth rod, and the Hypervolt Home 3 Pro has integrated PEN fault protection.8,10
Step 4: the network operator
This is the step that sets the timetable. On SSEN’s network it works like this:
| Your home | What the installer does |
|---|---|
| Total demand 60 amps or less, no safety concerns | Fits the charger, then notifies SSEN within 28 days1 |
| Total demand above 60 amps | Applies to connect and waits for approval before installing1 |
| Looped supply (shared service cable) | Submits a load check before installation1 |
If the supply can’t safely carry the extra load, SSEN arranges the upgrade or unlooping work before the charger goes in.1 Notifications and applications can go in on an ENA form, by email or through SSEN’s website.1 Outside SSEN’s area the same job goes to your own network operator. That is why we’d pay more for an installer who does this routinely than for a cheap one who leaves it to you. Octopus deals with the network application for its customers.12
Step 5: installation day
The fit takes a morning or an afternoon. Before the installer leaves, they should agree the charger’s position with you and set up the app; Octopus does both as standard.12 Ask for the paperwork: every new charger must come with a signed, dated statement of compliance with the Smart Charge Points Regulations.2
Step 6: set it up to charge cheaply
Out of the box, the charger’s default hours avoid 8am to 11am and 4pm to 10pm on weekdays. When you first use it, you can accept those hours, set your own or remove them, and you can override them whenever you need a charge.2 It also adds a random delay of up to 600 seconds before a scheduled charge starts; you can cancel it.2
Cheap overnight tariffs need a smart meter that talks to the supplier. Intelligent Octopus Go depends on the smart meter network, and EDF’s GoElectric needs a fully connected smart meter.7,13 If you don’t have one yet, ask your supplier to fit it while you wait for the charger survey, so the tariff is ready on the day the charger goes live. Our guide to smart meters explains how to check what you have.
On a smart tariff the supplier’s app takes over scheduling. Intelligent Octopus Go, for example, offers up to six hours of smart charging in every 24 hours, with eligible cars charging from 6.5p per kWh.7 Compare overnight rates in our guide to the best EV tariffs, or work out your own numbers with the EV charging cost calculator.
Can renters and flat owners get a grant?
Yes. The government pays 75% of the cost of buying and installing a charger, up to £500, and applications close on 31 March 2027 unless the scheme is renewed.3 Landlords apply a different way.14
You can claim if you rent a home or own a flat, including a shared-ownership flat. Owners of a house can’t, unless the house is converted into flats and they live in one of them, and lodgers living with the owner are excluded.6 Your car must be on the approved list and registered to you, leased or used as a work vehicle for at least 6 months, or on order.6 You can’t claim if you are about to move, if the property is empty or still being built, or if the law already requires a charger there, as in a new build.6
What about new builds and major renovations?
In England, Approved Document S sets charge point requirements for new homes, buildings converted into homes, and major renovations.15 Where the law already requires a charge point, as in a new build, you can’t claim the grant for one.6
Our verdict
The charger is the easy decision. The installer is the one that matters: pick a firm that surveys properly, quotes a fixed price after seeing your fuse and cable run, and files the network paperwork itself. Book that survey as soon as you have ordered the car, and if you rent or own a flat, claim the grant before 31 March 2027.3
Products compared
Show all 7 ▸
Hypervolt
Hypervolt Home 3 Pro
Price: No published price
Hypervolt Home 3 Pro: Where to buy: support.hypervolt.co.uk
as of · support.hypervolt.co.uk
Rolec
Rolec WallPod
MID meterPrice: No published price
Rolec WallPod: Where to buy: rolecserv.com
as of · rolecserv.com
British Gas
Hive Sync Energy Wall Charger 2
- Charging power
- 7.4 kW7
£9998
Hive Sync Energy Wall Charger 2: Where to buy: hivehome.com
as of · britishgas.co.uk, hivehome.com
Ohme
Ohme ePod
- Charging power
- 7.4 kW / 32 A9
Ohme ePod: Where to buy: ohme-ev.com
as of · ohme-ev.com
| Product | Charging power | Control | Size | Meter | Price |
|---|---|---|---|---|---|
myenergi zappi |
up to 22 kW (three-phase)1 | OCPP 1.6J (via cloud)1 | 438 × 282 × 122 mm1 | – | £779from £779 inc. VAT (installation not included)2myenergi zappi: myenergi.com |
Ohme Home Pro |
7.4 kW / 32 A3 | – | 170 × 200 × 100 mm, 4 kg3 | – | £999from £999 including standard installation3Ohme Home Pro: ohme-ev.com |
Hypervolt Home 3 Pro |
7.4 kW AC, single phase4 | – | 328 × 243 × 101 mm4 | – | No published priceHypervolt Home 3 Pro: support.hypervolt.co.uk |
Andersen A3 |
7 kW (no three-phase option)5 | – | 430 × 310 × 148 mm (156 mm with wooden front)5 | – | £995from £9955Andersen A3: andersen-ev.com |
Rolec WallPodMID meter |
up to 7.4 kW6 | – | – | MID-approved metering6 | No published priceRolec WallPod: rolecserv.com |
British GasHive Sync Energy Wall Charger 2 |
7.4 kW7 | – | – | – | £999from £999 with a standard installation (up to 10 m of cable, external route, no bonding work); bonding +£144, longer or internal cable runs +£50–£180, tethered 7 m cable +£508Hive Sync Energy Wall Charger 2: hivehome.com |
Ohme ePod |
7.4 kW / 32 A9 | – | – | – | £949from £949, including standard installation9Ohme ePod: ohme-ev.com |
All data
| Product | Charging power | Cable | Connectivity | Control | Size | Protection | Warranty | Screen | Earthing | Modes | Load management | Colours | Meter |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| myenergi zappi | up to 22 kW (three-phase)1 | Type 2 tethered (6.5 m) or socket1 | Wi-Fi, Ethernet1 | OCPP 1.6J (via cloud)1 | 438 × 282 × 122 mm1 | IP65, IK101 | 3 years2 | – | – | – | – | – | – |
| Ohme Home Pro | 7.4 kW / 32 A3 | Type 2 tethered, 5 m (8 m optional)3 | 4G multi-net SIM3 | – | 170 × 200 × 100 mm, 4 kg3 | IP553 | 3 years3 | Colour LCD screen3 | – | – | – | – | – |
| Hypervolt Home 3 Pro | 7.4 kW AC, single phase4 | Tethered Type 2 or Type 1; 5, 7.5 or 10 m (10 m Type 2 only)4 | Wi-Fi 2.4 GHz, Bluetooth LE4 | – | 328 × 243 × 101 mm4 | IP66, IK104 | – | – | Integrated PEN fault protection (BS 7671:2018 Amendment 2)4 | Boost, Eco (solar and grid), Super Eco (solar only)4 | Automatic load management4 | – | – |
| Andersen A3 | 7 kW (no three-phase option)5 | Tethered 5.5 m, hidden cable5 | – | – | 430 × 310 × 148 mm (156 mm with wooden front)5 | – | 7 years5 | – | – | – | – | 13 colours5 | – |
| Rolec WallPod | up to 7.4 kW6 | Universal socket or Type 2 tethered lead6 | 4G, Wi-Fi or Ethernet; OCPP 1.66 | – | – | IK106 | – | – | PME fault detection, no earth rod required6 | – | – | – | MID-approved metering6 |
| Hive Sync Energy Wall Charger 2 | 7.4 kW7 | Tethered or untethered7 | – | – | – | – | 3 years with installation7 | – | – | – | – | – | – |
| Ohme ePod | 7.4 kW / 32 A9 | Untethered9 | 4G multi-network SIM9 | – | – | – | 3 years9 | – | – | – | – | – | – |
- myenergi.com
- myenergi.com
- ohme-ev.com
- support.hypervolt.co.uk
- andersen-ev.com
- rolecserv.com
- britishgas.co.uk
- hivehome.com
- ohme-ev.com
Specifications come from each maker's own product page or datasheet, taken on 14 NOV 2026. Our picks are editorial judgement from those published specs, not test results; we haven't tested the products. – means the maker publishes no price.
Calculators
EV charging cost calculator
What home charging costs a year, against public charging and an EV tariff, and when a charger pays back.
Pre-filled from: Ofgem
Open the calculator
Example figures · Charging cost a year · as of 14 November 2026 8,000 miles £547–£668 a year
Rules and grants in force
EV chargepoint grant for renters and flat owners
GOV.UK Find a grant
up to £500 as of
Renters and flat owners can get 75% of the cost of a home chargepoint, up to £500 per socket. The scheme closes on the date given in the source unless it is renewed.
Official source find-government-grants.service.gov.uk
Updated · against find-government-grants.service.gov.uk
Dated rule changes
-
in 133 days
Chargepoint grant for renters and flat owners closes
The grant of 75% up to £500 per socket closes at 23:59 on 31 March 2027 unless it is renewed.