EV chargers · UK · Comparison
Ohme EV charger: Home Pro or ePod, and who should buy one
Ohme’s chargers are small, connect over 4G rather than your Wi-Fi, and come with standard installation in the price. That makes them easy. It does not make them the right pick for every drive.
Key facts
On this page
The usual way a smart charger goes wrong has nothing to do with electricity. It is mounted on the side of the house, twenty metres from the router, behind a brick wall, and it spends half its life offline. Ohme sidesteps that problem by putting a 4G SIM in the box. The charger talks to Ohme’s servers over the mobile network, whatever your broadband is doing.1
That is the main reason to buy one. The Ohme Home Pro costs from £999 with standard installation, has a 5 m tethered cable and a screen; the untethered ePod is £949 on the same terms.1,2 Both charge at up to 7.4 kW, the most a normal single-phase home supply allows.1,3
Our verdict: the Home Pro is the easy, sensible pick for a driver without solar panels who wants a tidy installed price and a charger that stays connected. With solar on the roof, the myenergi zappi or Hypervolt Home 3 Pro does more with the sunshine.4,5
Ohme Home Pro and ePod side by side
Ohme Home Pro
The easy, sensible pick without solar: a tidy installed price and it stays connected.
- Power
- 7.4 kW / 32 A
- Cable
- Tethered Type 2, 5 m; 8 m optional
- Screen
- Built-in LCD screen
- Connection
- 4G multi-network SIM
- Price
- From £999, standard installation included
Ohme ePod
Buy it only if you prefer an untethered socket; the Home Pro is worth the £50 extra.
- Power
- 7.4 kW / 32 A
- Cable
- Untethered: use your car’s cable
- Screen
- None; app and buttons on the charger
- Connection
- 4G multi-network SIM
- Price
- From £949, standard installation included
| Ohme Home Pro | Ohme ePod | |
|---|---|---|
| Price | From £999, standard installation included1 | From £949, standard installation included1 |
| Power | 7.4 kW / 32 A1 | 7.4 kW / 32 A1 |
| Cable | Tethered Type 2, 5 m; 8 m optional2 | Untethered: use your car’s cable1 |
| Screen | Built-in LCD screen1 | None; app and buttons on the charger1 |
| Connection | 4G multi-network SIM1 | 4G multi-network SIM1 |
| Warranty | 3 years1 | 3 years1 |
Each cell cites its source.
The two share the same electronics and the same 4G connection. The choice is about the cable. A tethered charger means you lift the plug and push it in; an untethered one means fetching the car’s own cable from the boot every evening, in exchange for a neater wall when nothing is plugged in. For daily use, we would pay the £50 extra for the Home Pro.1
The Home Pro is also small: 170 × 200 × 100 mm and 4 kg, rated IP55 for outdoor use.2 Next to a myenergi zappi at 438 × 282 × 122 mm, it takes up a fraction of the wall.6
What Ohme does well
Tariff scheduling. Link the charger to your electricity tariff in the Ohme app and it schedules charging into the off-peak hours for you.1 It works with any energy tariff and integrates directly with Intelligent Octopus Go.2,1 That pairing matters because the tariff, not the charger, decides most of your running cost: at the capped average rate for October to December 2026, a full charge costs far more than on an EV tariff.7 See our explainer on Intelligent Octopus Go and our comparison of the best EV tariffs.
Staying under your fuse. The Home Pro has home power balancing, which keeps the charger from overloading your supply when the oven and the shower are on.2
Earthing protection. Ohme’s chargers include open-PEN earthing protection.1 Ask your installer to confirm how they will earth the charger on your property, and whether an earth rod is needed.
Compliance. The Home Pro complies with the UK smart charging regulations and is OZEV approved.2 Those regulations require every home charger to come set to avoid weekday peak hours of 8am to 11am and 4pm to 10pm, to keep charging if the connection drops and to stay smart if you switch supplier.8
Small touches. Over-the-air software updates, and a Multicar setting that lets the app save and switch between your cars.2,1
Where a rival fits better
You have solar panels. Ohme’s Solar Boost uses excess solar power to charge the car, switched on in the app.2 That works, but the zappi is built around solar: its ECO mode blends spare solar with a grid top-up when the surplus falls below 1.4 kW, and ECO+ pauses until there is spare solar again.4 The Hypervolt Home 3 Pro has a similar pair, Eco and Super Eco, the second running on solar only.5 See our guides to the myenergi zappi and the Hypervolt EV charger.
You need a longer cable. The Home Pro’s 5 m standard cable, or 8 m as an extra, is enough for most drives.2 For a car parked well away from the wall, the Hypervolt comes in 5, 7.5 and 10 m lengths.5
You have three-phase power. Every Ohme home charger is a 7.4 kW unit.1 If your home has a three-phase supply and your car can use it, the zappi goes up to 22 kW.3
You want the charger to match the house. The Andersen EV charger is the design-led option, with a hidden cable and a long maker warranty.9
What if the 4G signal drops?
A smart charger that loses its connection must still charge the car: the regulations require it to remain capable of charging when it is cut off from the network.8 What you lose while it is offline is app control and remote scheduling. The multi-network SIM is there to make that rare.1 If your drive has poor mobile coverage as well as poor Wi-Fi, ask the installer to check the signal at the wall before fitting.
Do you need a smart meter or an EV tariff?
Not to charge, but you do to save. You can charge an electric car on a standard variable or fixed tariff.10 Charging at night on a time-of-use tariff can be cheaper, and with a smart charger and a smart meter you can link them and charge at set times.10 That is where the Ohme app’s tariff link pays off. Our guide to smart meters explains how to get one.
What “standard installation” means
The £999 and £949 prices include standard installation.1 That covers a straightforward job, and anything your home needs beyond it is extra. Get the installer to confirm in writing what is included before you book. Our step-by-step guide to installing an EV charger at home explains the survey, the network notification and what can push the price up, and the EV charging cost calculator shows what charging will cost on your tariff.
If you rent your home, or own and live in a flat, and have off-street parking, the government grant for renters and flat owners can cover part of the cost: read our guide to the EV charger grant.
Our verdict
The Ohme Home Pro is the low-effort choice done well: installed price on the label, a tethered cable, a screen, and a 4G link that does not depend on your Wi-Fi.1 Buy the ePod only if you prefer an untethered socket. With solar panels, look at the zappi or Hypervolt first; for the full field, see our best home EV chargers and the home EV charger guide.
Calculators
EV charging cost calculator
What home charging costs a year, against public charging and an EV tariff, and when a charger pays back.
Pre-filled from: Ofgem
Open the calculator
Example figures · Charging cost a year · as of 14 November 2026 8,000 miles £547–£668 a year
Rules and grants in force
Energy price cap, 1 October to 31 December 2026
Ofgem
26.32 p/kWh as of
Ofgem's price cap for October to December 2026 puts a typical dual-fuel bill paid by direct debit at £1,723 a year, 4% higher than the previous quarter. Electricity is capped at 26.32p per kWh with a standing charge of 54.83p a day; gas at 7.97p per kWh with a standing charge of 29.68p a day. Ofgem will announce the cap for January to March 2027 by 25 November 2026.
Official source ofgem.gov.uk · ofgem.gov.uk · ofgem.gov.uk
Updated · against ofgem.gov.uk
Dated rule changes
-
in 44 days
New energy price cap period begins Intended
Ofgem will announce by 25 November 2026 the price cap level for the period from 1 January to 31 March 2027.